How and Where NASA Faked the Lunar Orbit, Landing and Lift Off
by Julius Sequerra - Mar 10, 2015
0 3
Apollo Reality
This web page will show how, and where NASA faked the lunar approach, lunar orbit, lunar landing, and lunar take off, for all the Apollo Moon landing videos. Contrary to what many believe, the sequences were not shot in a desert, Hollywood studio, or Area 51. There may have been the odd picture taken at Area 51, and a few Apollo pictures that were taken in some remote desert, but the majority of stills and video were performed at Langley Research Center, Hampton, Virginia. Scientists at NASA knew in the early 60s that a manned mission to the Moon was impossible within 8 years, and a plan to fake the Moon landings was put into operation. NASA’s fake Moon pictures were taken at various locations such as KSC, JSC, LRC, and of course the odd one or two desert locations. I would also like to point out to that the art of faking both still photographs, and movie film is as old as photography and film itself. The 1930’s film “King Kong” showed a huge gorilla scaling up the Empire State building. If it’s on film are we led to believe it’s real? No of course not, but that is exactly what PAN’s, (Pro Apollo Nutters) are claiming. Their ridiculous debunking claim is that digital manipulation of photographs and film was not available back in the 1960’s, but they did not have digital artifacts back in 1930 when the film “King Kong” was made.
Langley is NASA’s space research facility, and staff are sworn to secrecy. All files pertaining to the Apollo (fake Moon missions) are stored there and not due for declassification until 2026. Other artifacts including the burnt out Apollo 1 capsule which killed Grissom, Chaffe and White. They have the facilities to perform anything, fake backgrounds, simulated orbiters etc. First piece of evidence is the large 250 foot traverse crane shown below. Notice fake Moon crater surface created beneath the crane.
This crane was purposely built in 63/64 to perfect the lunar landing as close as possible to the real thing, and used to suspend both the LM and astronauts. It enabled movement of the LM in all directions, ie, up down, left right, forward and reverse. Trial runs were so good NASA, opted to use the setup for faking the film of lunar landing, and take off, whereby the flag is blown over.
Bobby Braun claims the idea was to teach the astronauts how to land a rocket propelled LM. However no rocket powered LM was ever suspended from this crane. In any case anyone with the slightest gumption knows that it is impossible to control a rocket engine. The LM was controlled purely by traverse and lowering, in the same way as a conventional crane.
Below are more pictures showing mock LM suspended from this crane. In the center picture note the circular objects on the ground floor. The vast expanse of ground area beneath this crane was ideal for creating mock lunar landscapes. In reality the area was covered with gray ash, (possibly from some coal fired power station or boiler house), or plain cement. The circular objects were then raised by crane to create authentic looking Moon craters.
The far right picture above is a time lapse sequence taken at night. Notice spotlights on crane gantry, and how it illuminates the ground surface. The mock LM was traversed full length of crane, and simultaneously lowered at the same time in order to create an authentic looking lunar landing, when viewed from within the mock LM itself. Power supply to the mock LM was by cable from crane tower. This enabled a large fan, (fitted beneath the mock LM), to create the dust scatter effect of a rocket engine as it descended to the fake Moon surface. The film shown to public of the LM supposedly blasting off from the Moon’s surface was also created beneath this crane at LRC. The mock LM was simply attached to the crane, and hoisted very rapidly at the same time a pathetic looking blast off sparks was enacted beneath it. The film was then speeded up for showing to the public, and it is interesting to note that the camera filming this sequence cut short once the LM had reached the crane maximum height. In other words WHY didn’t the camera continue to film the LM until it was out of view? Because it was not possible under the circumstances in which the “lift off” was faked.
More Here>>
+++
ZenGardner.com
Thanks to: http://www.zengardner.com
- Alternative Science
- Conspiracy
- Forbidden History
by Julius Sequerra - Mar 10, 2015
0 3
Apollo Reality
This web page will show how, and where NASA faked the lunar approach, lunar orbit, lunar landing, and lunar take off, for all the Apollo Moon landing videos. Contrary to what many believe, the sequences were not shot in a desert, Hollywood studio, or Area 51. There may have been the odd picture taken at Area 51, and a few Apollo pictures that were taken in some remote desert, but the majority of stills and video were performed at Langley Research Center, Hampton, Virginia. Scientists at NASA knew in the early 60s that a manned mission to the Moon was impossible within 8 years, and a plan to fake the Moon landings was put into operation. NASA’s fake Moon pictures were taken at various locations such as KSC, JSC, LRC, and of course the odd one or two desert locations. I would also like to point out to that the art of faking both still photographs, and movie film is as old as photography and film itself. The 1930’s film “King Kong” showed a huge gorilla scaling up the Empire State building. If it’s on film are we led to believe it’s real? No of course not, but that is exactly what PAN’s, (Pro Apollo Nutters) are claiming. Their ridiculous debunking claim is that digital manipulation of photographs and film was not available back in the 1960’s, but they did not have digital artifacts back in 1930 when the film “King Kong” was made.
Langley is NASA’s space research facility, and staff are sworn to secrecy. All files pertaining to the Apollo (fake Moon missions) are stored there and not due for declassification until 2026. Other artifacts including the burnt out Apollo 1 capsule which killed Grissom, Chaffe and White. They have the facilities to perform anything, fake backgrounds, simulated orbiters etc. First piece of evidence is the large 250 foot traverse crane shown below. Notice fake Moon crater surface created beneath the crane.
This crane was purposely built in 63/64 to perfect the lunar landing as close as possible to the real thing, and used to suspend both the LM and astronauts. It enabled movement of the LM in all directions, ie, up down, left right, forward and reverse. Trial runs were so good NASA, opted to use the setup for faking the film of lunar landing, and take off, whereby the flag is blown over.
Bobby Braun claims the idea was to teach the astronauts how to land a rocket propelled LM. However no rocket powered LM was ever suspended from this crane. In any case anyone with the slightest gumption knows that it is impossible to control a rocket engine. The LM was controlled purely by traverse and lowering, in the same way as a conventional crane.
Below are more pictures showing mock LM suspended from this crane. In the center picture note the circular objects on the ground floor. The vast expanse of ground area beneath this crane was ideal for creating mock lunar landscapes. In reality the area was covered with gray ash, (possibly from some coal fired power station or boiler house), or plain cement. The circular objects were then raised by crane to create authentic looking Moon craters.
The far right picture above is a time lapse sequence taken at night. Notice spotlights on crane gantry, and how it illuminates the ground surface. The mock LM was traversed full length of crane, and simultaneously lowered at the same time in order to create an authentic looking lunar landing, when viewed from within the mock LM itself. Power supply to the mock LM was by cable from crane tower. This enabled a large fan, (fitted beneath the mock LM), to create the dust scatter effect of a rocket engine as it descended to the fake Moon surface. The film shown to public of the LM supposedly blasting off from the Moon’s surface was also created beneath this crane at LRC. The mock LM was simply attached to the crane, and hoisted very rapidly at the same time a pathetic looking blast off sparks was enacted beneath it. The film was then speeded up for showing to the public, and it is interesting to note that the camera filming this sequence cut short once the LM had reached the crane maximum height. In other words WHY didn’t the camera continue to film the LM until it was out of view? Because it was not possible under the circumstances in which the “lift off” was faked.
More Here>>
+++
ZenGardner.com
Thanks to: http://www.zengardner.com